Belt & Rig Sizing Instructions

EDC Gun Belt Sizing Instructions

If you are purchasing an EDC Gun Belt with us you are already making good choices, let’s continue that with making sure that your new belt fits you just right.

Instructions for Actual Measurement or Belt Size:

  1. Take a belt that you already wear comfortably and lay it on a flat surface.
  2. Measure the belt from the tip of the belt buckle to the hole being used when wearing your belt.  This measurement is the belt size.
  3. Measure your waist through your belt loops with a tape measure. This is your actual measurement, it is also the belt size.
  4. If the measurement taken is an odd number, you should round up to the next size. For example: if the measurement is 41″, then you would round up to a 42″ inch belt size. This would be the most accurate measurement possible.
  5. Write down your belt size and be ready to select your size when you are ordering your EDC Gun Belt. 
 
Wearing a 30" waist jean. The actual measurement for belt is 34"
Wearing size 34 belt with full-size 1911 holster.
Previous
Next

Western Rig Sizing Instructions

Measuring for a Western Rig. Actual size shown is 40.
Wearing size 40 Wild Bunch rig over his size 34 EDC belt.
Previous
Next

To make sure that your Western Holster Rig Fits you just right we need to make sure that you select the right measurements for you.

Instructions for Actual Size:

  1. Find a position to measure where you feel your rig would be most comfortable. We recommend a position between your normal belt line and your hip.
  2. Measure around this position using a tape measure.
  3. If the measurement taken is an odd number, you should round up to the next size. For example: if the measurement is 41″, then you would round up to a 42″ actual size. This would be the most accurate measurement possible.
  4. Write down your actual size and be ready to select your size when you are ordering your Western Holster Rig.