EDC Gun Belt Sizing Instructions
If you are purchasing an EDC Gun Belt with us you are already making good choices, let’s continue that with making sure that your new belt fits you just right.
Instructions for Actual Measurement or Belt Size:
- Take a belt that you already wear comfortably and lay it on a flat surface.
- Measure the belt from the tip of the belt buckle to the hole being used when wearing your belt. This measurement is the belt size.
- Measure your waist through your belt loops with a tape measure. This is your actual measurement, it is also the belt size.
- If the measurement taken is an odd number, you should round up to the next size. For example: if the measurement is 41″, then you would round up to a 42″ inch belt size. This would be the most accurate measurement possible.
- Write down your belt size and be ready to select your size when you are ordering your EDC Gun Belt.
Previous
Next
What happens if I order the wrong size belt?
No problem! We will gladly exchange the belt for you. Please call or email us for a return authorization number and send the belt back along with a short note detailing how much larger or smaller the belt needs to be made.
Upon receipt of the return we will contact you by phone to go over sizing and to go over the billing information.
Please note that a restocking fee will be applied to returns & exchanges for belts smaller than 42″ and larger than 46″
Restocking Fees on Returns & Exchanges:
Belts smaller than 42″ and larger than 46″
30% of purchase price on plain or basketweave finish
$100 on handtooled belts
You
may return the belt to us in the same box it was received or a similar
size box. We simply ask that you do not roll up the belt to make it fit
in a small box.
Our address is:
Kirkpatrick Leather
6501 Arena Blvd., Suite 104A
Laredo TX 78041
